Patton-electronic SmartNode 4400 Manuale Utente Scaricare il pdf (Pagina 37)

1. Configure IP address 37

SmartNode 4400 Series Getting Started Guide 4 • Getting started with the SmartNode 4400 Series

Note

The SmartNode CD-ROM contains a collection of third party software

tools (including TFTP servers and Telnet utilities) to help you configure,

operate and monitor the SmartNode device.þ

Connect to the RS-232 console port

The RJ-45 Console port is wired as an EIA-561, RS-232 port. Use the included Model 16F-561 adapter and

cable (see figure 17) between the SmartNode’s Console port and a PC or workstation’s RS-232 serial interface.

Activate the terminal emulation program on the PC or workstation that supports the serial interface

(e.g. HyperTerm).

Figure 17. Connecting to the RS-232 Console port

Terminal emulation program settings:

• Asynchronous

• 9600 bps

• No parity

• 8 bit

• 1 stop bit

• No flow control

Console port

Laptop PC

Model 16F-561

adapter and cable

100-240V

(50-60 Hz)

1 AMP

UNIT EQUIPPED WITH DUAL SUPPLIES

DISCONNECT BOTH SUPPLIES

BEFORE SERVICING

ETH 0/0

Console

Telco Ports

Reset

ETH 0/1

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 68 69

Nessun commento

Patton-electronic SmartNode 4400 Manuale Utente Pagina 37