Patton-electronic 29XX Manuale Utente

Model 29xx SeriesRemote Access ServerAdministrator’s Reference GuideSales Office: +1 (301) 975-1000Technical Support: +1 (301) 975-1007E-mail: suppor

10Access Server Administrator’s Reference Guide About this guide• Chapter 18 describes configuring the RIP Version 2 window• Chapter 19 describes con

Dial In User Statistics window 100Access Server Administrators’ Reference Guide 7 • Dial InNumber Called (diactNumberDialed)The phone number that was

Dial In User Statistics window 101Access Server Administrators’ Reference Guide 7 • Dial In• v90(7)—V.90 modulation• v110(8)—V.110 modulation (not cu

Dial In User Statistics window 102Access Server Administrators’ Reference Guide 7 • Dial InLocally Initiated Retrains (diactLocalRetrains) The number

103Chapter 8 Dial OutChapter contentsIntroduction...

104Access Server Administrators’ Reference Guide 8 • Dial OutK56flex(diModemK56Enable) ...

105Access Server Administrators’ Reference Guide 8 • Dial OutCompression (modemCompression) ...

106Access Server Administrators’ Reference Guide 8 • Dial OutPackets Sent (doactSentDataFrames) ...

Introduction 107Access Server Administrators’ Reference Guide 8 • Dial OutIntroductionThe Dial Out PPP feature allows the Remote Access Server to ini

Dial Out Main Window 108Access Server Administrators’ Reference Guide 8 • Dial OutUser (doactUsername)The username that the caller entered for a char

Dial Out Main Window 109Access Server Administrators’ Reference Guide 8 • Dial Out• modemError(7)—an internal DSP error has occurred.• pppClose(8)—Th

11Access Server Administrator’s Reference Guide About this guideMouse conventionsThe following conventions are used when describing mouse actions:Tab

Dial Out Details window 110Access Server Administrators’ Reference Guide 8 • Dial Out• dspLinkErr(35)• dspPutMsgErr(36)• lisIpcErr(38)• dspOpenErr(39

Dial Out Modify window 111Access Server Administrators’ Reference Guide 8 • Dial OutFigure 42. Dial Out Details windowDial Out Modify windowThe Dial

Dial Out Modify window 112Access Server Administrators’ Reference Guide 8 • Dial OutModify LoginUse this section to configure the outgoing TCP port a

Dial Out Modify window 113Access Server Administrators’ Reference Guide 8 • Dial OutFailure Banner (doFailureBanner)This defines a message that will

Dial Out Modify window 114Access Server Administrators’ Reference Guide 8 • Dial OutMaximum Session Time (doSessionTimeout)This is the maximum time (

Dial Out Modify window 115Access Server Administrators’ Reference Guide 8 • Dial Outhard disk space on your server. It is recommended that you only e

Dial Out Modify window 116Access Server Administrators’ Reference Guide 8 • Dial OutMinimum Speed (doModemMinSpeed)This setting determines the slowes

Dial Out Locations Window 117Access Server Administrators’ Reference Guide 8 • Dial OutRestrict Modification (doModemRestrictMods)Enabling this featu

Dial Out Locations Window 118Access Server Administrators’ Reference Guide 8 • Dial OutAdd LocationLocations are added to the table using the followi

Dial Out Locations Window 119Access Server Administrators’ Reference Guide 8 • Dial OutMultilink (locationConfigMultilink)This is the number of calls

12Chapter 1 IntroductionChapter contentsIntroduction...

Dial Out Locations Window 120Access Server Administrators’ Reference Guide 8 • Dial OutView/Modify location detailsTo view and/or modify the location

Dial Out Locations Window 121Access Server Administrators’ Reference Guide 8 • Dial OutDial Out Modem Profiles WindowThis window allows the administr

Dial Out Locations Window 122Access Server Administrators’ Reference Guide 8 • Dial Out• analog-v34(4)• analog-v32(5)• analog-v22bis(6)• analog-v22(7

Dial Out User Statistics Window 123Access Server Administrators’ Reference Guide 8 • Dial Out• requireV42bis(2)—v.42bis compression is mandatory, oth

Dial Out User Statistics Window 124Access Server Administrators’ Reference Guide 8 • Dial Out• Phone information• Data transfer statistics• Physical

Dial Out User Statistics Window 125Access Server Administrators’ Reference Guide 8 • Dial OutDsp Link (doactDSPIndex)The physical DSP chip that the o

Dial Out User Statistics Window 126Access Server Administrators’ Reference Guide 8 • Dial Out• pppClose(8)—This reason will be given after PPP is ini

Dial Out User Statistics Window 127Access Server Administrators’ Reference Guide 8 • Dial Out• dspPutMsgErr(36)• lisIpcErr(38)• dspOpenErr(39)• inval

Dial Out User Statistics Window 128Access Server Administrators’ Reference Guide 8 • Dial OutLocal MRU (doStatLocalMRU)The current value of the MRU f

Dial Out User Statistics Window 129Access Server Administrators’ Reference Guide 8 • Dial OutLocal PPP Protocol Compression (doStatLocalToRemoteProtC

Introduction 13Access Server Administrators’ Reference Guide 1 • IntroductionIntroductionYou may configure the access server by using its internal HT

Dial Out User Statistics Window 130Access Server Administrators’ Reference Guide 8 • Dial OutPhoneThis portion of the Dial Out User Statistics window

Dial Out User Statistics Window 131Access Server Administrators’ Reference Guide 8 • Dial OutPhysical LayerThis portion of the Dial Out User Statisti

An example section of dialout 132Access Server Administrators’ Reference Guide 8 • Dial OutData Compression Protocol (doactCompression)The modem data

133Chapter 9 CallbackIntroduction...

Introduction 134Access Server Administrators’ Reference Guide 9 • CallbackIntroductionThe RAS has the ability to call back any user dialing into it.

Dial-in Main Window 135Access Server Administrators’ Reference Guide 9 • CallbackDial-in Main WindowFigure 54. Dial-in user waiting to be called back

Static User Authentication 136Access Server Administrators’ Reference Guide 9 • CallbackStatic User AuthenticationIn the Modify Static User window ar

Accounting information 137Access Server Administrators’ Reference Guide 9 • CallbackAccounting informationBefore callback is initiated, the accountin

138Chapter 10 Drop and InsertIntroduction...

Introduction 139Access Server Administrators’ Reference Guide 10 • Drop and InsertIntroductionThe Drop and Insert window (see figure 57) contains set

Saving HTTP/HTML Object Changes 14Access Server Administrators’ Reference Guide 1 • IntroductionSaving HTTP/HTML Object ChangesSometimes you will nee

How Drop and Insert works 140Access Server Administrators’ Reference Guide 10 • Drop and InsertOriginating Link (dractLinkIndex) Which WAN link this

How Drop and Insert works 141Access Server Administrators’ Reference Guide 10 • Drop and InsertFigure 58. Drop and insert diagramNoteThis functionali

142Chapter 11 Digital Signal Processing (DSP)Chapter contentsIntroduction...

143Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)Local—Reneg (dspLocalRenegotiates) ...

Introduction 144Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)IntroductionThe access server uses between 12 and 6

DSP Settings main window 145Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)DSP Settings main windowThis is where y

DSP Settings main window 146Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)• booting(3)—The DSP has just been load

DSP Connection Performance 147Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)DSP Memory CaptureThis portion of the

DSP Connection Performance 148Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)Connection SummariesThis part of the

DSP Connection Performance 149Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)DSP Connection TotalsThis portion of

15Chapter 2 HomeChapter contentsIntroduction...

DSP Connection Performance 150Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)Remote—Reneg (dspRemoteRenegotiates)T

DSP information window 151Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)DSP information windowThis is where you c

DSP information window 152Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)Instance First State (dspStatefirst)Ident

DSP information window 153Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)Successful Connects (dspSuccessfulConnect

154Chapter 12 EthernetChapter contentsIntroduction...

Introduction 155Access Server Administrators’ Reference Guide 12 • EthernetIntroductionThe access server provides management and statistical informat

Ethernet Main Window 156Access Server Administrators’ Reference Guide 12 • EthernetNoteNote that the speed settings indicated above could indicate th

Ethernet Modify Window 157Access Server Administrators’ Reference Guide 12 • EthernetEthernet Modify WindowThis window allows you to make changes to

Ethernet Statistics 158Access Server Administrators’ Reference Guide 12 • EthernetSecondaryIpAddress (boxEtherASecondaryIpAddress)The secondary ether

Ethernet Statistics 159Access Server Administrators’ Reference Guide 12 • EthernetFigure 66. Ethernet windowFCS Errors (dot3StatsFCSErrors)The number

Introduction 16Access Server Administrators’ Reference Guide 2 • HomeIntroductionThis chapter describes the HOME window—the first Administration Page

Ethernet Statistics 160Access Server Administrators’ Reference Guide 12 • EthernetReceived Frames Too Long (dot3StatsFrameTooLongs)The number of fram

161Chapter 13 Filter IPChapter contentsIntroduction...

Introduction 162Access Server Administrators’ Reference Guide 13 • Filter IPIntroductionThe access server software provides an IP filtering system th

Modify Filter 163Access Server Administrators’ Reference Guide 13 • Filter IPFigure 68. Filter IP parameters windowThe following parameters can be co

Modify Filter 164Access Server Administrators’ Reference Guide 13 • Filter IPAction (filterIpAction)Specifies the action to take on a packet whether

Modify Filter 165Access Server Administrators’ Reference Guide 13 • Filter IPDestination IPApplies the action based on the results of the stated comp

Modify Filter 166Access Server Administrators’ Reference Guide 13 • Filter IP• greaterThan(3) – the destination port in the IP packet must be greater

An example of using a filter 167Access Server Administrators’ Reference Guide 13 • Filter IPFigure 69. IP Filter showing default for dialoutDefault f

An example of using a filter 168Access Server Administrators’ Reference Guide 13 • Filter IP– Protocol: not set– TCP Established: anyPackets– Default

An example of using a filter 169Access Server Administrators’ Reference Guide 13 • Filter IP• Action: pass• Source IP and mask: not set• Destination

Operating Status Variables 17Access Server Administrators’ Reference Guide 2 • HomeOperating Status Variables There are seven system variables which

170Chapter 14 Frame RelayChapter contentsIntroduction...

171Access Server Administrators’ Reference Guide 14 • Frame RelayCongestion (frameEnableCongestion) ...

Introduction 172Access Server Administrators’ Reference Guide 14 • Frame RelayIntroductionFrame Relay is a high-speed datalink communications technol

The Frame Relay main window 173Access Server Administrators’ Reference Guide 14 • Frame RelayThe Frame Relay main window also has the following links

DLMI Window 174Access Server Administrators’ Reference Guide 14 • Frame RelayBad CRC (framerelRxBadCrc)The number of packets received that had bad CR

DLMI Window 175Access Server Administrators’ Reference Guide 14 • Frame RelaySignalling (frDlcmiState)Inband signalling used to communicate link and

DLCI window 176Access Server Administrators’ Reference Guide 14 • Frame RelayLMI Interface (frDlcmiInterface)LMI is used in the generic sense as an i

DLCI window 177Access Server Administrators’ Reference Guide 14 • Frame RelayDLCI (frCircuitDlci)The Data Link Connection Identifier (DLCI) for this

178Chapter 15 InterfacesChapter contentsIntroduction...

Introduction 179Access Server Administrators’ Reference Guide 15 • InterfacesIntroductionThe Interfaces window (see figure 73) shows the quantity of

Immediate Actions 18Access Server Administrators’ Reference Guide 2 • HomeImmediate Actions There are several immediate actions (see figure 5) which,

Interfaces main window 180Access Server Administrators’ Reference Guide 15 • InterfacesType (ifType)The type of interface, distinguished according to

Interface Details 181Access Server Administrators’ Reference Guide 15 • InterfacesInterface DetailsWhen you click on a Details link, the type and des

Interface Details 182Access Server Administrators’ Reference Guide 15 • Interfaces• slip(28)• frame-relay(32)Max Transfer Unit (ifMTU)The size of the

Interface Details 183Access Server Administrators’ Reference Guide 15 • InterfacesReceived and Discarded w/No Errs (ifInDiscards)The number of inboun

184Chapter 16 IPChapter contentsIntroduction...

185Access Server Administrators’ Reference Guide 16 • IPTotal Received in Error (tcpInErrs) ...

186Access Server Administrators’ Reference Guide 16 • IPState (RouteState) ...

Introduction 187Access Server Administrators’ Reference Guide 16 • IPIntroductionThe IP (Internet Protocol) window lists IP configuration statistics

IP main window 188Access Server Administrators’ Reference Guide 16 • IP• Modify—This window is where you can modify forwarding and time-to-live setti

IP main window 189Access Server Administrators’ Reference Guide 16 • IPForwarded Datagrams (ipForwDatagrams)The number of input datagrams for which t

19Chapter 3 Import/ExportChapter contentsIntroduction...

Modify 190Access Server Administrators’ Reference Guide 16 • IP# of Reassembled Fragments (ipReasmReqds)The number of IP fragments received which nee

TCP 191Access Server Administrators’ Reference Guide 16 • IPNoteFor some managed nodes, this object may take on only a subset of the values possible.

TCP 192Access Server Administrators’ Reference Guide 16 • IPRetransmit-Timeout Algorithm (tcpRtoAlgorithm)The algorithm that determines the timeout v

TCP 193Access Server Administrators’ Reference Guide 16 • IPTotal Retransmitted (tcpRetransSegs)The total number of segments retransmitted—that is, t

UDP 194Access Server Administrators’ Reference Guide 16 • IPdeleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of th

ICMP 195Access Server Administrators’ Reference Guide 16 • IPHandling of NETBIOS UDP Broadcasts (boxNetbiosUdpBridging)Enables the passing of broadca

ICMP 196Access Server Administrators’ Reference Guide 16 • IPFigure 80. ICMP windowClick on ICMP under the Configuration Menu to monitor access serve

ICMP 197Access Server Administrators’ Reference Guide 16 • IPDestinations Unreachable (IcmpInDestUnreachs, IcmpOutDestUnreachs)The number of ICMP des

Addressing Information 198Access Server Administrators’ Reference Guide 16 • IPEcho Replys (icmpInReps, icmpOutReps)The number of ICMP echo reply mes

Routing Information 199Access Server Administrators’ Reference Guide 16 • IPFigure 82. IP addressing Details windowEntry Interface Index (ipAdEntIfIn

Patton Electronics Company, Inc.7622 Rickenbacker DriveGaithersburg, MD 20879 USAVoice: +1 (301) 975-1000Fax: +1 (301) 869-9293Technical Support: +1 (

Introduction 20Access Server Administrators’ Reference Guide 3 • Import/ExportIntroductionThe Import/Export function enables you to make a backup (or

Routing Information 200Access Server Administrators’ Reference Guide 16 • IPFigure 83. IP Routing Information windowThe IP Routing Information window

Routing Information 201Access Server Administrators’ Reference Guide 16 • IPGateway (RouteGateway)Specifies the IP address to which the packets shoul

Routing Information 202Access Server Administrators’ Reference Guide 16 • IP1. Type the IP address of the host that serves as a gateway for your loca

O/S forwarding table window 203Access Server Administrators’ Reference Guide 16 • IPAdvanced…Enables a route to be attached to an interface. Packets

O/S forwarding table window 204Access Server Administrators’ Reference Guide 16 • IPNext Hop (ipRouteNextHop) The IP address of the next hop of this

IP Routing Destination window 205Access Server Administrators’ Reference Guide 16 • IPInfo (ipRouteInfo) A reference to MIB definitions specific to t

Address Translation Information 206Access Server Administrators’ Reference Guide 16 • IP• user(2)—Added by an administrator on the IP Routing Informa

Address Translation Information 207Access Server Administrators’ Reference Guide 16 • IPFigure 87. Address Translation Information windowInterface (i

208Chapter 17 MFR Version 2Chapter contentsIntroduction...

209Access Server Administrators’ Reference Guide 17 • MFR Version 2Last Response Code (interRegCallingNumLast)...

Export Configuration 21Access Server Administrators’ Reference Guide 3 • Import/ExportTo export the flash configuration, click on the Export Flash li

Introduction 210Access Server Administrators’ Reference Guide 17 • MFR Version 2IntroductionThe MFR Version 2 window (see figure 88) contains objects

Interregister Signalling 211Access Server Administrators’ Reference Guide 17 • MFR Version 2Idle Code (lineSigIdleCode)Code to indicate that a line i

MFR Version 2—Modify 212Access Server Administrators’ Reference Guide 17 • MFR Version 2MFR Version 2—ModifyIn the MFR Version 2 Modify window (see f

MFR Version 2—Modify 213Access Server Administrators’ Reference Guide 17 • MFR Version 2Country (lineSigCountry)Specifying a particular country or it

MFR Version 2—Modify 214Access Server Administrators’ Reference Guide 17 • MFR Version 2Forward Seize (lineSigForwardSeize)Code to indicate there is

MFR Version 2—Modify 215Access Server Administrators’ Reference Guide 17 • MFR Version 2• abcd-1100(12)• abcd-1101(13)• abcd-1110(14)• abcd-1111(15)B

MFR Version 2—Modify 216Access Server Administrators’ Reference Guide 17 • MFR Version 2NoteInterregister Signalling setup codes are country-specific

MFR Version 2—Modify 217Access Server Administrators’ Reference Guide 17 • MFR Version 2• a10(10)• a11(11)• a12(12)• a13(13)• a14(14)• a15(15)Calling

MFR Version 2—Modify 218Access Server Administrators’ Reference Guide 17 • MFR Version 2• a5(5)• a6(6)• a7(7)• a8(8)• a9(9)• a10(10)• a11(11)• a12(12

219Chapter 18 RIP Version 2Chapter contentsIntroduction...

Import Configuration 22Access Server Administrators’ Reference Guide 3 • Import/ExportTo save the displayed data as a text file, select the Save opti

Introduction 220Access Server Administrators’ Reference Guide 18 • RIP Version 2IntroductionThe RIP Version 2 main window (see figure 90) describes r

RIP Version 2 main window 221Access Server Administrators’ Reference Guide 18 • RIP Version 2• ripVersion1 (2)—Send RIP updates compliant with RFC 10

RIP Version 2—Configuration 222Access Server Administrators’ Reference Guide 18 • RIP Version 2RIP Version 2—ConfigurationThe RIP Version 2 Configura

RIP Version 2 (Statistics) 223Access Server Administrators’ Reference Guide 18 • RIP Version 2Receive (rip2IfConfReceive)This indicates which version

RIP Version 2 (Statistics) 224Access Server Administrators’ Reference Guide 18 • RIP Version 2Sent Updates (rip2IfStatSentUpdates)The number of trigg

225Chapter 19 SNMPChapter contentsIntroduction...

Introduction 226Access Server Administrators’ Reference Guide 19 • SNMPIntroductionThe access server provides management and statistical information

In 227Access Server Administrators’ Reference Guide 19 • SNMP• 1406—Definitions of Managed Objects for the DS1 and E1 Interface Types• 1643—Definitio

Out 228Access Server Administrators’ Reference Guide 19 • SNMPGet/Get Next Variables (snmpInTotalReqVars)The total number of MIB objects that have be

Out 229Access Server Administrators’ Reference Guide 19 • SNMPGenerated Errors (snmpOutGenErrs)The total number of SNMP PDUs that were generated by t

23Chapter 4 AlarmsChapter contentsIntroduction...

230Chapter 20 SystemChapter contentsIntroduction...

231Access Server Administrators’ Reference Guide 20 • SystemSNMP and HTTP ...

Introduction 232Access Server Administrators’ Reference Guide 20 • SystemIntroductionThe System main window (see figure 94) contains general setup in

System main window 233Access Server Administrators’ Reference Guide 20 • SystemSuper User Password (boxSnmpMasterPassword)This displays the super use

System main window 234Access Server Administrators’ Reference Guide 20 • SystemFigure 95. System main window (Operating System Heap Memory, Enclosure

System main window 235Access Server Administrators’ Reference Guide 20 • SystemEnclosure SystemThis portion of the System main window contains inform

System main window 236Access Server Administrators’ Reference Guide 20 • SystemPhysical Location (sysLocation)The physical location of this node (e.g

System—Modify window 237Access Server Administrators’ Reference Guide 20 • SystemSystem—Modify windowThe System—Modify window (see figure 96) is wher

System—Modify window 238Access Server Administrators’ Reference Guide 20 • SystemPayable FeaturesThis portion of the System—Modify window contains in

System—Packet Holding Message Blocks... 239Access Server Administrators’ Reference Guide 20 • System• disableWeb(2)—When this option is selected, acc

Introduction 24Access Server Administrators’ Reference Guide 4 • AlarmsIntroductionThe access server has an extensive alarm reporting system which en

System—Packet Holding Message Blocks... 240Access Server Administrators’ Reference Guide 20 • SystemNo. Free (boxbuffersfree)The number of buffers th

241Chapter 21 System LogChapter contentsIntroduction...

Introduction 242Access Server Administrators’ Reference Guide 21 • System LogIntroductionThe System Log window (see figure 98) displays the results f

System Log—Modify 243Access Server Administrators’ Reference Guide 21 • System LogSystem Log—ModifyThe System Log—Modify window (see figure 99) displ

System Log—Modify 244Access Server Administrators’ Reference Guide 21 • System Logsystem logging will provide. PriorityVerbose will generate the most

System Log—Modify 245Access Server Administrators’ Reference Guide 21 • System Log• priorityInfo(20)• priorityOddity(40)• priorityService(60)• priori

System Log—Modify 246Access Server Administrators’ Reference Guide 21 • System Log• authpriv(10)• ftp(11)• local0(16)• local1(17)• local2(18)• local3

System Log—Volatile Memory 247Access Server Administrators’ Reference Guide 21 • System LogSystem Log—Volatile MemoryThe System Log—Volatile Memory w

System Log—Non-Volatile Memory 248Access Server Administrators’ Reference Guide 21 • System LogSystem Log—Non-Volatile MemoryThe System Log—Non-Volat

249Chapter 22 T1/E1 LinkChapter contentsIntroduction...

Displaying the Alarms window 25Access Server Administrators’ Reference Guide 4 • Alarms• SYSLOG/SNMP—For external notification, the access server can

250Access Server Administrators’ Reference Guide 22 • T1/E1 LinkError Injection (linkInjectError) ...

251Access Server Administrators’ Reference Guide 22 • T1/E1 LinkUnavailable Seconds (dsx1FarEndCurrentUASs) ...

Introduction 252Access Server Administrators’ Reference Guide 22 • T1/E1 LinkIntroductionThe T1/E1 Link Activity window (see figure 102) shows the co

T1/E1 Link Activity main window 253Access Server Administrators’ Reference Guide 22 • T1/E1 Link•Near End Line Statistics—Current… link—clicking on t

Alarms Present 254Access Server Administrators’ Reference Guide 22 • T1/E1 LinkCircuit ID (dsx1CircuitIdentifier)This is the transmission vendor’s ci

Alarms Present 255Access Server Administrators’ Reference Guide 22 • T1/E1 LinkFor E1 links, the Far End Alarm failure is declared when bit 3 of time

Alarms Present 256Access Server Administrators’ Reference Guide 22 • T1/E1 LinkISDN Signaling Alarms (linkSignalStatus)NoteISDN Signaling Alarms will

Alarms Present 257Access Server Administrators’ Reference Guide 22 • T1/E1 LinkDESCRIPTION: This variable indicates the Line Status of the interface.

Line Status—Configuration 258Access Server Administrators’ Reference Guide 22 • T1/E1 LinkLine Status—ConfigurationClicking on the Line Status—Config

WAN Circuit Configuration—Modify 259Access Server Administrators’ Reference Guide 22 • T1/E1 LinkWAN Circuit Configuration—ModifyClicking on the Conf

Displaying the Alarms window 26Access Server Administrators’ Reference Guide 4 • Alarms• Modify Alarms—Clicking on this link takes you to a window wh

WAN Circuit Configuration—Modify 260Access Server Administrators’ Reference Guide 22 • T1/E1 LinkLine Type (dsx1LineType)This variable indicates the

WAN Circuit Configuration—Modify 261Access Server Administrators’ Reference Guide 22 • T1/E1 LinkLine Build Out (linkLineBuildOut)This variable is us

WAN Circuit Configuration—Modify 262Access Server Administrators’ Reference Guide 22 • T1/E1 LinkRobbed-Bit Signalling Protocol (linkSignalling)This

WAN Circuit Configuration—Modify 263Access Server Administrators’ Reference Guide 22 • T1/E1 Link• linkYellowOn—Force the transmission of a yellow al

Line Status—Channel Assignment 264Access Server Administrators’ Reference Guide 22 • T1/E1 LinkLine Status—Channel AssignmentClicking on the Line Sta

Near End Line Statistics—Current 265Access Server Administrators’ Reference Guide 22 • T1/E1 Link• frameRelay(3)—64 k frame relay connection• private

Near End Line Statistics—Current 266Access Server Administrators’ Reference Guide 22 • T1/E1 LinkErrored Seconds (dsx1CurrentESs)The number of errore

Near End Line Statistics—History 267Access Server Administrators’ Reference Guide 22 • T1/E1 LinkNear End Line Statistics—HistoryClick on Near End Li

Near End Line Statistics—Totals 268Access Server Administrators’ Reference Guide 22 • T1/E1 LinkControlled Slip Seconds (dsx1IntervalCSSs)The number

Near End Line Statistics—Totals 269Access Server Administrators’ Reference Guide 22 • T1/E1 LinkSeverely Errored Seconds (dsx1TotalSESs)The number of

Modify Response—Configuring the alarm response system 27Access Server Administrators’ Reference Guide 4 • AlarmsAlarm Name (alarmName)The alarm items

Far End Line Statistics—Current 270Access Server Administrators’ Reference Guide 22 • T1/E1 LinkFar End Line Statistics—CurrentClick on Near End Line

Far End Line Statistics—History 271Access Server Administrators’ Reference Guide 22 • T1/E1 LinkPath Code Violations (dsx1FarEndCurrentPCVs)The numbe

Far End Line Statistics—History 272Access Server Administrators’ Reference Guide 22 • T1/E1 LinkSeverely Errored Seconds (dsx1FarEndIntervalSESs)The

Far End Line Statistics—Totals 273Access Server Administrators’ Reference Guide 22 • T1/E1 LinkFar End Line Statistics—TotalsClick on Far End Line St

Far End Line Statistics—Totals 274Access Server Administrators’ Reference Guide 22 • T1/E1 LinkBursty Errored Seconds (dsx1FarEndTotalBESs)The number

Far End Line Statistics—Totals 275Access Server Administrators’ Reference Guide 22 • T1/E1 LinkExample 2The RAS hosts 1 NFAS group containing 3 PRIsS

276Chapter 23 Sync PPPIntroduction...

277Access Server Administrators’ Reference Guide 23 • Sync PPPAuthentication Side (pppAuthenticationSide) ...

Introduction 278Access Server Administrators’ Reference Guide 23 • Sync PPPIntroductionPoint-to-point protocol (PPP) is a widely used data link layer

WAN Circuit CONFIGURATION window 279Access Server Administrators’ Reference Guide 23 • Sync PPPDesired Function (slotfunction)ppp(5)—channel is set f

Modify Response—Configuring the alarm response system 28Access Server Administrators’ Reference Guide 4 • AlarmsAlarm Syslog Priority (syslogAlarmPri

WAN Circuit CONFIGURATION window 280Access Server Administrators’ Reference Guide 23 • Sync PPPState (pppActState)This is the current state of the PP

WAN Circuit CONFIGURATION window 281Access Server Administrators’ Reference Guide 23 • Sync PPPAuthentication Technique (pppDefaultAuthenticationTech

WAN Circuit CONFIGURATION window 282Access Server Administrators’ Reference Guide 23 • Sync PPPCompression (pppDefaultIpCompression)If none(1) then t

WAN Circuit CONFIGURATION window 283Access Server Administrators’ Reference Guide 23 • Sync PPPRECEIVE (framerelRxOctets)Receive rate in bits per sec

WAN Circuit CONFIGURATION window 284Access Server Administrators’ Reference Guide 23 • Sync PPP• pap(3)—password authentication protocol will be use

WAN Circuit CONFIGURATION window 285Access Server Administrators’ Reference Guide 23 • Sync PPPLink Compression (pppLinkCompression)This object enabl

WAN Circuit CONFIGURATION window 286Access Server Administrators’ Reference Guide 23 • Sync PPPLCP Authentication(pppStatLcpAuth)Authentication type

WAN Circuit CONFIGURATION window 287Access Server Administrators’ Reference Guide 23 • Sync PPP• enabled(1)—ACC is enabledRemote-Local AC Comprsn (p

WAN Circuit CONFIGURATION window 288Access Server Administrators’ Reference Guide 23 • Sync PPPRemote Max Slot ID (pppIpRemoteMaxSlotId)The Max-Slot-

WAN Circuit CONFIGURATION window 289Access Server Administrators’ Reference Guide 23 • Sync PPPModify Link Configuration WindowClicking on the Modify

Modify Alarms—Configuring alarm severity levels 29Access Server Administrators’ Reference Guide 4 • AlarmsModify Alarms—Configuring alarm severity le

290Chapter 24 Layer 2 Tunneling Protocol (L2TP)Introduction...

Introduction 291Access Server Administrators’ Reference Guide 24 • Layer 2 Tunneling Protocol (L2TP)IntroductionThis chapter explains the operation o

L2TP Configuration 292Access Server Administrators’ Reference Guide 24 • Layer 2 Tunneling Protocol (L2TP)RADIUS AuthenticationFigure 121. L2TP RADIU

L2TP Configuration 293Access Server Administrators’ Reference Guide 24 • Layer 2 Tunneling Protocol (L2TP)command is used then the value used (cisco&

L2TP Configuration 294Access Server Administrators’ Reference Guide 24 • Layer 2 Tunneling Protocol (L2TP)Router(config-if)#ppp authentication chapRo

295Chapter 25 Contacting PattonChapter contentsIntroduction...

Introduction 296Access Server Administrators’ Reference Guide 25 • Contacting PattonIntroductionThe About link displays Patton Electronics Company co

297Chapter 26 LicenseChapter contentsIntroduction...

Introduction 298Access Server Administrators’ Reference Guide 26 • LicenseIntroductionThe License link presents the End User License Agreement for th

End User License Agreement 299Access Server Administrators’ Reference Guide 26 • License2. Title:Title to the Program(s), all copies of the Program(s

3ContentsAudience...

30Chapter 5 AuthenticationChapter contentsIntroduction...

300Appendix A Supported RADIUS AttributesChapter contentsAccess-Accept Attributes...

Access-Accept Attributes 301Access Server Administrators’ Reference Guide A • Supported RADIUS AttributesAccess-Accept AttributesAccess-Request Attri

Access-Challenge Attributes 302Access Server Administrators’ Reference Guide A • Supported RADIUS AttributesAccess-Challenge AttributesAccounting-Sta

Accounting-Stop Attributes 303Access Server Administrators’ Reference Guide A • Supported RADIUS AttributesAccounting-Stop AttributesUser-Name 1NAS-I

304Appendix B MIB treesChapter contentsModel 2960 MIB Tree Structure...

Model 2960 MIB Tree Structure 305Access Server Administrators’ Reference Guide B • MIB treesModel 2960 MIB Tree Structure

306Appendix C Technical ReferenceChapter contentsIntroduction...

Introduction 307Access Server Administrators’ Reference Guide C • Technical ReferenceIntroductionThis appendix contains the following information:• “

Configuring a RADIUS server 308Access Server Administrators’ Reference Guide C • Technical ReferenceA RADIUS client consists of a Network Access Serv

Configuring a RADIUS server 309Access Server Administrators’ Reference Guide C • Technical ReferenceRADIUS Authentication Procedure The procedure for

31Access Server Administrators’ Reference Guide 5 • AuthenticationSecret (auSecret) ...

Configuring a RADIUS server 310Access Server Administrators’ Reference Guide C • Technical ReferenceRADIUS—Where Can I Get It?RADIUS available for fr

Configuring a RADIUS server 311Access Server Administrators’ Reference Guide C • Technical ReferenceIntel: RADIUS Overview http://support.intel.com/s

Configuring a RADIUS server 312Access Server Administrators’ Reference Guide C • Technical ReferenceFigure 126. Authentication window2. On the Authen

Using SNMP with the Access Server 313Access Server Administrators’ Reference Guide C • Technical ReferenceNoteDepending on how you define NAS-Identif

Using SNMP with the Access Server 314Access Server Administrators’ Reference Guide C • Technical ReferenceFinding the section of the MIB tree in whic

Using SNMP with the Access Server 315Access Server Administrators’ Reference Guide C • Technical ReferenceFigure 128. MIB tree for Model 2960 access

Configuring Non-Facility Associated Signaling (NFAS) 316Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring Non-Facility

Configuring Frame Relay 317Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring Frame RelayFrame Relay is a high-speed da

Configuring Frame Relay 318Access Server Administrators’ Reference Guide C • Technical ReferenceThe following settings must match the line configurat

Configuring Frame Relay 319Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring Frame Relay link parametersClick on Frame

Introduction 32Access Server Administrators’ Reference Guide 5 • AuthenticationIntroductionUse the Authentication pages to set up system security and

Configuring Frame Relay 320Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring Permanent Virtual Circuits The data link

Configuring Frame Relay 321Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring IP routing with a Frame Relay LinkAs each

Configuring Frame Relay 322Access Server Administrators’ Reference Guide C • Technical Reference2. Type in the Destination network (see figure 132).

Configuring DNIS 323Access Server Administrators’ Reference Guide C • Technical ReferenceConfiguring DNISDNIS (Dialed Number Identification Service)

Configuring a leased line/dedicated line connection 324Access Server Administrators’ Reference Guide C • Technical Reference2. If you wish to apply t

Configuring a leased line/dedicated line connection 325Access Server Administrators’ Reference Guide C • Technical Referenceping and beginning a new

Configuring a leased line/dedicated line connection 326Access Server Administrators’ Reference Guide C • Technical ReferenceFigure 137. Leased Line P

The Statistics section 33Access Server Administrators’ Reference Guide 5 • AuthenticationValidated via static database (auAuthenticationsValidStatic)

The Configuration section 34Access Server Administrators’ Reference Guide 5 • AuthenticationThe Configuration sectionThe configuration section of the

The Configuration section 35Access Server Administrators’ Reference Guide 5 • AuthenticationHost Address (auHostAddress)Tells the access server the I

The Configuration section 36Access Server Administrators’ Reference Guide 5 • AuthenticationAccounting Port (auAcctPort)This is the UDP port on the a

Setting Up Authentication 37Access Server Administrators’ Reference Guide 5 • Authentication• CCCCC—Call ID in hex. The call ID used is the one recor

Setting Up Authentication 38Access Server Administrators’ Reference Guide 5 • Authentication(auValidation)” below), configure the additional paramete

Setting Up Authentication 39Access Server Administrators’ Reference Guide 5 • AuthenticationHost Address (auHostAddress)Tells the access server the I

Contents Access Server Administrators’ Reference Guide4Dial Protocol window...

Setting Up Authentication 40Access Server Administrators’ Reference Guide 5 • AuthenticationAccounting Port (auAcctPort)This is the UDP port on the a

Static User Authentication 41Access Server Administrators’ Reference Guide 5 • AuthenticationStatic User AuthenticationTo view or modify the static u

Modify Static User 42Access Server Administrators’ Reference Guide 5 • Authentication• admin—Not currently implemented.• monitor—Not currently implem

Modify Static User 43Access Server Administrators’ Reference Guide 5 • AuthenticationFigure 19. Static User settings windowService IP (suServiceIP)Th

44Chapter 6 DAXChapter contentsIntroduction...

Introduction 45Access Server Administrators’ Reference Guide 6 • DAXIntroductionThe digital cross-connect (DAX) link allows configuration of the acce

Configuring the DAX 46Access Server Administrators’ Reference Guide 6 • DAXMain Reference (daxClockMainRef)The main reference parameter determines wh

Configuring the DAX 47Access Server Administrators’ Reference Guide 6 • DAX• netref-2(102)—Use to obtain system timing from a slave circuit.• interna

48Chapter 7 Dial InChapter contentsIntroduction...

49Access Server Administrators’ Reference Guide 7 • Dial InNumber Called (diactNumberDialed) ...

5Access Server Administrators’ Reference Guide Contents The Frame Relay main window...

50Access Server Administrators’ Reference Guide 7 • Dial InMultiLink (diConfigMultilink) ...

51Access Server Administrators’ Reference Guide 7 • Dial InDNIS profile (dnisPoolAssignedProfile) ...

52Access Server Administrators’ Reference Guide 7 • Dial InIP Address (diactIP) ...

53Access Server Administrators’ Reference Guide 7 • Dial InPackets Sent (diactSentDataFrames) ...

Introduction 54Access Server Administrators’ Reference Guide 7 • Dial InIntroductionThe Dial In main window (see figure 22) is where you can change o

Dial In main window 55Access Server Administrators’ Reference Guide 7 • Dial InFigure 22. Dial In main windowDial In main windowThe Dial In window di

Dial In main window 56Access Server Administrators’ Reference Guide 7 • Dial InState (diactState)As the call comes into the access server it can be i

Dial Modulations window 57Access Server Administrators’ Reference Guide 7 • Dial In• v23(24)—V.23 modulationConnect Speed (diactTxSpeed)The connected

Dial Modulations window 58Access Server Administrators’ Reference Guide 7 • Dial In• Online—The access server has completed authentication and the us

Dial Modulations window 59Access Server Administrators’ Reference Guide 7 • Dial InReceive Connection Speed (diactRxSpeed) The connected speed of the

Contents Access Server Administrators’ Reference Guide6System Log—Modify ...

Dial Telco window 60Access Server Administrators’ Reference Guide 7 • Dial InDial Telco windowThis window shows the telco characteristics for individ

Dial Telco window 61Access Server Administrators’ Reference Guide 7 • Dial In• Kill—The administrator can manually disconnect the user by activating

Dial Protocol window 62Access Server Administrators’ Reference Guide 7 • Dial InDial Protocol windowThis window shows the protocol negotiations of th

Dial Protocol window 63Access Server Administrators’ Reference Guide 7 • Dial In• 12tpTunneled—Subsequent multilink call that was answered by another

Dial Protocol window 64Access Server Administrators’ Reference Guide 7 • Dial In• Tacacs(6)- Not currently implemented• Edp(7)• ShivaPap(8)- Not curr

Dial In Details 65Access Server Administrators’ Reference Guide 7 • Dial InDial In DetailsThe Dial In Details window (see figure 26) shows how the sy

Dial In Modify default window 66Access Server Administrators’ Reference Guide 7 • Dial InDial In Modify default windowThe Dial In Modify default wind

Dial In Modify default window 67Access Server Administrators’ Reference Guide 7 • Dial InModify LoginThis portion of the Dial In Modify default windo

Dial In Modify default window 68Access Server Administrators’ Reference Guide 7 • Dial In• textORchapORpap(6)—This setting enables clear text logins

Dial In Modify default window 69Access Server Administrators’ Reference Guide 7 • Dial In• slip(5)—SLIP or PPP connection will be allowed. SLIP is no

7Access Server Administrators’ Reference Guide Contents Configuring Non-Facility Associated Signaling (NFAS) ...

Dial In Modify default window 70Access Server Administrators’ Reference Guide 7 • Dial InModify AttemptsThis portion of the Dial In Modify default wi

Dial In Modify default window 71Access Server Administrators’ Reference Guide 7 • Dial InLogin Attempts Allowed (diAllowAttempts)The maximum number o

Dial In Modify default window 72Access Server Administrators’ Reference Guide 7 • Dial InSet the MultiLink—Max # of Calls per User parameter to the m

Dial In Modify default window 73Access Server Administrators’ Reference Guide 7 • Dial InFigure 29. V.92 Configuration windowModify ISDN Configuratio

Dial In Modify default window 74Access Server Administrators’ Reference Guide 7 • Dial InModify V.92 ConfigurationThis portion of the Dial In Modify

Dial In Modify default window 75Access Server Administrators’ Reference Guide 7 • Dial InV90(diModemV90Enable)Enables or disables V90 modem modulatio

Dial In Modify default window 76Access Server Administrators’ Reference Guide 7 • Dial InGuard Tone (diModemGuardTone) Normally a guard tone is not r

Manage DNIS Window 77Access Server Administrators’ Reference Guide 7 • Dial In• Direct(0)—No compression will be used.• requestV42bis(1)—Enable V.42b

Manage DNIS Window 78Access Server Administrators’ Reference Guide 7 • Dial In• DNIS Profiles—clicking on the DNIS Profiles link takes you to the pag

Manage DNIS Window 79Access Server Administrators’ Reference Guide 7 • Dial InDNIS Entry WindowClicking on the ID in the Manage DNIS Window displays

Contents Access Server Administrators’ Reference Guide8

Manage DNIS Window 80Access Server Administrators’ Reference Guide 7 • Dial InDNIS Profiles DNIS profiles can be set in two different ways:• Per CALL

Manage DNIS Window 81Access Server Administrators’ Reference Guide 7 • Dial InDNIS Profiles Main WindowFigure 33. DNIS Profiles windowID (dnisIpProfi

Manage DNIS Window 82Access Server Administrators’ Reference Guide 7 • Dial In• chap(4)—This setting assumes that all calls will be PPP users. No use

Manage DNIS Window 83Access Server Administrators’ Reference Guide 7 • Dial InStatus (dnisIpProfileStatus)Indicates if the DNIS Profile is used in an

Manage DNIS Window 84Access Server Administrators’ Reference Guide 7 • Dial In• text(2)—A username prompt is displayed and a username must be entered

Manage DNIS Window 85Access Server Administrators’ Reference Guide 7 • Dial InService Port (dnisProfileServicePort)The TCP port that the remote serve

Manage DNIS Window 86Access Server Administrators’ Reference Guide 7 • Dial InDNIS IP Pools WindowFigure 35. DNIS IP Pools windowThe DNIS IP Pools Wi

Manage DNIS Window 87Access Server Administrators’ Reference Guide 7 • Dial In2. Enter a valid IP Address range. A valid IP address range is of the f

Dial In User Statistics window 88Access Server Administrators’ Reference Guide 7 • Dial InDial In User Statistics windowThis window shows statistics

Dial In User Statistics window 89Access Server Administrators’ Reference Guide 7 • Dial In To view individual user statistics, select an active user

9About this guideThis guide describes configuring a Patton Electronics access server. This section describes the following:• Who should use this guide

Dial In User Statistics window 90Access Server Administrators’ Reference Guide 7 • Dial In• Rlogin —The user has an rlogin session runningSecurity Le

Dial In User Statistics window 91Access Server Administrators’ Reference Guide 7 • Dial InTime Left In Session (diactRemainingSession) Number of seco

Dial In User Statistics window 92Access Server Administrators’ Reference Guide 7 • Dial In• papAuthenticationFailure(49)—Invalid username/password co

Dial In User Statistics window 93Access Server Administrators’ Reference Guide 7 • Dial In• telnetError(62)• rloginError(63)• tcpConnAborted(67)—Conn

Dial In User Statistics window 94Access Server Administrators’ Reference Guide 7 • Dial In• dspPutMsgErr(36)• noDsp(37)• lisIpcErr(38)• dspOpenErr(39

Dial In User Statistics window 95Access Server Administrators’ Reference Guide 7 • Dial InPPP StatisticsThis portion of the Dial In User Statistics w

Dial In User Statistics window 96Access Server Administrators’ Reference Guide 7 • Dial InRemote MRU (diStatRemoteMRU) The current value of the MRU f

Dial In User Statistics window 97Access Server Administrators’ Reference Guide 7 • Dial InRemote-Local PPP Protocol Comprsn (diStatRemoteToLocalProtC

Dial In User Statistics window 98Access Server Administrators’ Reference Guide 7 • Dial InFigure 39. IP windowOperational Status (diIpOperStatus) The

Dial In User Statistics window 99Access Server Administrators’ Reference Guide 7 • Dial InPrimary Domain Name Server (diactPrimaryDNS)This is the DNS